temporary self adhesive carpet protection film Dealer Must Remove carpet Protection
Description
Automobile Carpet Protective Film is an inexpensive alternative to paper floor mats and work well preventing dirt, grease and moisture from falling on the carpeted floor of your customer's vehicles
Technical data
1. Adhesion: ›7.5N/25mm, 28oz/inch (793.8g/25mm normally).
2. Tack:10# Steel Ball
3. Cohesion:›72hours
4. Tensile Strength: ›18MPa, 2000psi (13.79Mpa normally).
5. Elongation at break: ›350%, 400 %( normally).
6. Product shelf life is 18 months from date of manufacture under normal conditions of 70℉ and 50% relative humidity.
Specifications
1. Description: protective film for automotive carpet, clear color, regular wound, with “DEALER MUST REMOVE PROTECTIVE COVER” printing and 21’’ or 24’’ perforation line, both ends are with core plugs.
2. Material: LDPE film coated with pressure sensitive adhesive.
Backing: PE (Polyethylene)
Adhesive: Solvent Based Acrylic Pressure Sensitive Adhesive (it is also called Formulated acrylic proprietary adhesive).
3. Item No.: SHIRE-19052
4. Total thickness: 2mil (50micorns), 3mil (75micorns), 4mil (100microns).
5.Size: 20mm-1560mm(width)x 20-200m(length),for example, 21’’x200’, 24’’x200’, 21’’x500’, 24’’x500’, 21’’x600’, 24’’x600’ or others as your requirement.
6. Color: transparent
7. Printability: 1-2colors to be printed with your logo or other information.
| Categoriess |
Printing or no |
Color appearance |
Bonding strength (g/25mm) |
Thickness (mm) |
| Auto Adhesive Floor Mat , Automotive Carpet Plastic Film , Carpet Adhesive Film |
Whitout printing |
PE transparent |
30~500 |
0.04; 0.05; 0.06 |
| PE milky |
30~500 |
0.04; 0.06 |
| PE blue |
30~500 |
0.05 |
| PE black and white |
30~500 |
0.04; 0.05; 0.06 |
| Printing |
PE black and white |
30~500 |
0.06; 0.07; 0.08 |
| PE blue |
30~500 |
0.07 |
| PE transparent |
30~500 |
0.06; 0.07; 0.08 |
| Extinction white |
30~500 |
0.06 |
| Milky and transparent |
30~500 |
0.06 |
| PE transparent |
30~500 |
0.04; 0.05; 0.06 |
Pictures
Features
1. 100% virgin raw material, high transparency.
2. High temperature resistance in short time, above 300% elongation rate and good elasticity.
3. Easy to be sticked and peeled off, teared of without residual on the protected surface.
4. Printing will not remain on the surface when peeling off.
5. The surface of the protective film is inert and not easy to react with chemicals.
Contact
Sophie Liu
E-mail:Sophie@shire-plastic.com
Phone/Wechat/Whatsapp:+0086-13645832408
Your message must be between 20-3,000 characters!
